1. Hege termyske conductivity suver koper of lege-alloyed strip foar waarmte Exchanger
Grade: T2, TP1, TP2, TU1, TU2, CuSn0.15 ensfh.
| Klasse | GB | ISO | ASTM | EN | JIS |
| Pure koper | T2 | Cu-FRHC | C11000 | CW004A | C1100 |
| Oxygen-frij koper | TU1 | / | C10200 | C103 | C1011 |
| TU2 | Cu-OF | C10200 | C103 | C1020 | |
| Fosforisearre koper | TP1 | Cu-DLP | C12000 | / | C1201 |
| TP2 | Cu-DHP | C12200 | CW024A | C1220 | |
| Tellurium koper | TSn0.12 | CuSn0.15 | C14415 | CW117C | C1441 |
Performance eigenskippen: Hege termyske conductivity, hege elektryske conductivity, goede ferwurking prestaasjes, ductility, djip tekening, goede corrosie ferset
Spesifikaasjes:
Dikte: 0.005-5 mm
Breedte: 4-1000 mm
Tolerânsje (mm)
| Dikte | Breedte | |||||
| ＜300 | ＜600 | 1000 | ＜400 | ＜600 | ＜1000 | |
| Dikte tolerânsje ± | Breedte tolerânsje ± | |||||
| 0.05-0.1 | 0.005 | --- | --- | 0.2 | --- | --- |
| 0,1-0,3 | 0.008 | 0.015 | --- | 0.3 | 0.4 | --- |
| 0,3-0,5 | 0.015 | 0.020 | --- | 0.3 | 0.5 | --- |
| 0,5-0,8 | 0.020 | 0.030 | 0.060 | 0.3 | 0.5 | 0.8 |
| 0,8-1,2 | 0.030 | 0.040 | 0.080 | 0.4 | 0.6 | 0.8 |
| 1.2-2.0 | 0.040 | 0.045 | 0.100 | 0.4 | 0.6 | 0.8 |
| 2.0-3.0 | 0.045 | 0.050 | 0.120 | 0.5 | 0.6 | 0.8 |
| boppe 3.0 | 0.050 | 0.12 | 0.15 | 0.6 | 0.8 | 1.0 |
Applikaasje: in soad brûkt as fin as tank yn airconditioning, kachel en elektryske fjilden.
Solêre termyske wettersystemen；HVAC-systemen；Gaswetterheaters；Forsearre luchtferwaarming en koeling；Elektronyske systemen en ensfh.
| Alloy Grade | Temper | Treksterkte (N/mm²) | Ferlinging % | Hurdens | Konduktiviteit%IACS | Thermyske konduktiviteit W/(mK) | |||||||||||||||
| GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB (HV) | JIS(HV) | ASTM(HR) | EN |
| |
| T2 | C1100 | C11000 | Cu-FRHC | M | O | O61 | R200/H040 | ≥195 | ≥195 | ≤235 | 200-250 | ≥30 | ≥30 |
|
| ≤70 |
|
| 40-65 | 97 | 388 |
| Y4 | 1/4H | H01 | R220/H040 | 215-275 | 215-285 | 235-290 | 220-260 | ≥25 | ≥20 |
| ≥33 | 60-90 | 55-100 | 18-51 | 40-65 | ||||||
| Y2 | 1/2H | H02 | R240/H065 | 245-345 | 235-315 | 255-315 | 240-300 | ≥8 | ≥10 |
| ≥8 | 80-110 | 75-120 | 43-57 | 65-95 | ||||||
| Y | H | / | R290/H090 | 295-380 | ≥275 | / | 290-360 | ≥3 |
| ≥4 | 90-120 | ≥80 |
| 90-110 | |||||||
| T | / | R360/H110 | ≥350 | / | ≥360 |
|
|
| ≥2 | ≥110 |
| ≥110 | |||||||||
| TU1 | C1020 | C10200 | CU-0F | M | O | H00 | R200/H040 | ≥195 | ≥195 | 200-275 | 200-250 | ≥30 | ≥30 |
|
| ≤70 |
|
| 40-65 | 101 | 391 |
| Y4 | 1/4H | H01 | R220/H040 | 215-275 | 215-285 | 235-295 | 220-260 | ≥25 | ≥15 |
| ≥33 | 60-90 | 55-100 |
| 40-65 | ||||||
| Y2 | 1/2H | H02 | R240/H065 | 245-345 | 235-315 | 255-315 | 240-300 | ≥8 | ≥10 |
| ≥8 | 80-110 | 75-120 |
| 65-95 | ||||||
| H | H03 | R290/H090 | ≥275 | 285-345 | 290-360 |
|
| ≥8 | ≥80 |
| 90-110 | ||||||||||
| Y | H04 | 295-380 | 295-360 | ≥3 |
|
| 90-120 |
| |||||||||||||
| H06 | R360/H110 | 325-385 | ≥360 |
|
| ≥2 |
| ≥110 | |||||||||||||
| T | H08 | ≥350 | 345-400 |
|
|
| ≥110 |
| |||||||||||||
| H10 | ≥360 |
|
|
| |||||||||||||||||
| TU2 | C1020 | C10200 | CU-0F | M | O | H00 | R200/H040 | ≥195 | ≥195 | 200-275 | 200-250 | ≥30 | ≥30 |
|
| ≤70 |
|
| 40-65 | 98 | 385 |
| Y4 | 1/4H | H01 | R220/H040 | 215-275 | 215-285 | 235-295 | 220-260 | ≥25 | ≥15 |
| ≥33 | 60-90 | 55-100 |
| 40-65 | ||||||
| Y2 | 1/2H | H02 | R240/H065 | 245-345 | 235-315 | 255-315 | 240-300 | ≥8 | ≥10 |
| ≥8 | 80-110 | 80-100 |
| 65-95 | ||||||
| H | H03 | R290/H090 | ≥275 | 285-345 | 290-360 |
|
| ≥8 | ≥80 |
| 90-110 | ||||||||||
| Y | H04 | 295-380 | 295-360 | ≥3 |
|
| 90-120 |
| |||||||||||||
| H06 | R360/H110 | 325-385 | ≥360 |
|
| ≥2 |
| ≥110 | |||||||||||||
| T | H08 | ≥350 | 345-400 |
|
|
| ≥110 |
| |||||||||||||
| H10 | ≥360 |
|
|
| |||||||||||||||||
| TP1 | C1201 | C12000 | CU-DLP | M | O | H00 | R200/H040 | ≥195 | ≥195 | 200-275 | 200-250 | ≥30 | ≥30 |
|
| ≤70 |
|
| 40-65 | 90 | 350 |
| Y4 | 1/4H | H01 | R220/H040 | 215-275 | 215-285 | 235-295 | 220-260 | ≥25 | ≥15 |
| ≥33 | 60-90 | 55-100 |
| 40-65 | ||||||
| Y2 | 1/2H | H02 | R240/H065 | 245-345 | 235-315 | 255-315 | 240-300 | ≥8 | ≥10 |
| ≥8 | 80-110 | 75-120 |
| 65-95 | ||||||
| H | H03 | R290/H090 | ≥275 | 285-345 | 290-360 |
|
| ≥8 | ≥80 |
| 90-110 | ||||||||||
| Y | H04 | 295-380 | 295-360 | ≥3 |
|
| 90-120 |
| |||||||||||||
| H06 | R360/H110 | 325-385 | ≥360 |
|
| ≥2 |
| ≥110 | |||||||||||||
| T | H08 | ≥350 | 345-400 |
|
|
| ≥110 |
| |||||||||||||
| H10 | ≥360 |
|
|
|
| ||||||||||||||||
| TP2 | C1220 | C12200 | CU-DHP | M | O | H00 | R200/H040 | ≥195 | ≥195 | 200-275 | 200-250 | ≥30 | ≥30 |
|
| ≤70 |
|
| 40-65 | 70-90 | 340 |
| Y4 | 1/4H | H01 | R220/H040 | 215-275 | 215-285 | 235-295 | 220-260 | ≥25 | ≥15 |
| ≥33 | 60-90 | 55-100 |
| 40-65 | ||||||
| Y2 | 1/2H | H02 | R240/H065 | 245-345 | 235-315 | 255-315 | 240-300 | ≥8 | ≥10 |
| ≥8 | 80-110 | 75-120 |
| 65-95 | ||||||
| H | H03 | R290/H090 | ≥275 | 285-345 | 290-360 |
|
| ≥8 | ≥80 |
| 90-110 | ||||||||||
| Y | H04 | 295-380 | 295-360 | ≥3 |
|
| 90-120 |
| |||||||||||||
| H06 | R360/H110 | 325-385 | ≥360 |
|
| ≥2 |
| ≥110 | |||||||||||||
| T | H08 | ≥350 | 345-400 |
|
|
| ≥110 |
| |||||||||||||
| H10 | ≥360 |
|
|
|
| ||||||||||||||||
2. Hege corrosie ferset koper nikkel CuNi10/19/30 strip foar waarmte Exchanger en koeler
Grade: CuNi10, CuNi19/20, CuNi30 ensfh.
| Materiaal | GB | ISO | ASTM | EN | JIS |
| Nikkel koper alloy | B10 | CuNi10 | C70600 | CN102 | C7060 |
| B19/20 | CuNi19 | C71000 | CN104 | C7100 | |
| B30 | CuNi30 | C71600 | CN107 | C7160 |
Prestaasje skaaimerken: Goede ferwurkjen eigenskippen, corrosie ferset, hege temperatuer en hege druk wetter ferset
Spesifikaasjes
Dikte: 0,15-1,2 mm
Breedte: 10-300 mm
Tolerânsje (mm)
| Dikte | Breedte | |||
| ＜300 | ＜600 | ＜400 | ＜600 | |
| Dikte tolerânsje ± | Breedte tolerânsje ± | |||
| 0,1-0,3 | 0.008 | 0.015 | 0.3 | 0.4 |
| 0,3-0,5 | 0.015 | 0.020 | 0.3 | 0.5 |
| 0,5-0,8 | 0.020 | 0.030 | 0.3 | 0.5 |
| 0,8-1,2 | 0.030 | 0.040 | 0.4 | 0.6 |
Applikaasje: In soad brûkt yn macht planten, desalination yndustry, marine engineering, petrochemyske yndustry.
| Alloy Grade | Temper | Treksterkte (N/mm²) | Ferlinging % | Hurdens | |||||||||||||||
| GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB (HV) | JIS(HV) | ASTM(HR) | EN |
| B10 |
| C70690 | CuNi10 |
|
|
|
|
|
| ≥290 | ≥350 |
|
| ≥35 | ≥25 |
|
|
|
|
| B19 |
| C71000 | CuNi19 |
|
|
|
| ≥275 |
| 338-655 | ≥310 | ≥25 |
| 11-40 | 35-38 |
|
|
|
|
| B30 |
| C71520 | CuNi30 |
|
| M20 |
|
|
| 310-450 |
|
|
| ≥30 |
|
|
|
|
|
| H01 | 400-495 | ≥20 | 67-81 | ||||||||||||||||
| H02 | 455-550 | ≥10 | 76-85 | ||||||||||||||||
| H04 | 515-605 | ≥7 | 83-89 | ||||||||||||||||
| H06 | 550-635 | ≥5 | 85-91 | ||||||||||||||||
| H08 | 580-650 |
| 87-91 | ||||||||||||||||
3. Admiraliteit messing alloy strip foar waarmte Exchanger tank en kachels
Grade: CuZn30/33/36 en ensfh.
| Materiaal | GB | ISO | ASTM | EN | JIS |
|
Koper | H70 | CuZn30 | C26000 | CW505L | C2600 |
| H68 | CuZn33 | C26800 | CW506L | C2680 | |
| H65 | CuZn36 | C27000 | CW507L | C2700 |
Prestaasje skaaimerken: Goede meganyske eigenskippen;ekonomysk
Spesifikaasjes:
Dikte: 0.05-5mm
Breedte: ≤600mm of ≤1000mm (T≥0.5mm)
Tolerânsje (mm)
| Dikte | Breedte | |||||
| ＜300 | ＜600 | 1000 | ＜400 | ＜600 | ＜1000 | |
| Dikte tolerânsje ± | Breedte tolerânsje ± | |||||
| 0.05-0.1 | 0.005 | --- | --- | 0.2 | --- | --- |
| 0,1-0,3 | 0.008 | 0.015 | --- | 0.3 | 0.4 | --- |
| 0,3-0,5 | 0.015 | 0.020 | --- | 0.3 | 0.5 | --- |
| 0,5-0,8 | 0.020 | 0.030 | 0.060 | 0.3 | 0.5 | 0.8 |
| 0,8-1,2 | 0.030 | 0.040 | 0.080 | 0.4 | 0.6 | 0.8 |
| 1.2-2.0 | 0.040 | 0.045 | 0.100 | 0.4 | 0.6 | 0.8 |
| 2.0-3.0 | 0.045 | 0.050 | 0.120 | 0.5 | 0.6 | 0.8 |
| boppe 3.0 | 0.050 | 0.12 | 0.15 | 0.6 | 0.8 | 1.0 |
Applikaasje: tank en koppen fan koeler, evaporator yn marine yndustry.
| Alloy Grade | Temper | Treksterkte (N/mm²) | Ferlinging % | Hurdens | |||||||||||||||
| GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB (HV) | JIS(HV) | ASTM(HR) | EN |
| H70 | C2600 | C26000 | CUZn30 | M | O | M02 | R270/H055 | ≥290 |
| 285-350 | 270-350 | ≥40 |
|
| ≥40 | ≤90 |
|
| 55-90 |
| Y4 | 1/4H | H01 | R350/H095 | 325-410 |
| 340-405 | 350-430 | ≥35 |
|
| ≥21 | 85-115 |
| 43-57 | 95-125 | ||||
| Y2 | 1/2H | H02 | R410/H120 | 355-460 | 355-440 | 395-460 | 410-490 | ≥25 | ≥28 |
| ≥9 | 100-130 | 85-145 | 56-66 | 120-155 | ||||
| Y | H | H04 | R480/H150 | 410-540 | 410-540 | 490-560 | ≥480 | ≥13 |
|
|
| 120-160 | 105-175 | 70-73 | ≥150 | ||||
| T | EH | H06 | 520-620 | 520-620 | 570-635 | ≥4 |
|
| 150-190 | 145-195 | 74-76 | ||||||||
| TY | SH | H08 | ≥570 | 570-670 | 625-690 |
|
|
| ≥180 | 165-215 | 76-78 | ||||||||
| H68 | C2620 | C26200 | CUZn33 | M | / | / | R280/H055 | ≥290 | / | / | 280-380 | ≥40 | / | / | ≥40 | ≤90 | / | / | 50-90 |
| Y4 | R350/H095 | 325-410 | 350-430 | ≥35 | ≥23 | 85-115 | 90-125 | ||||||||||||
| Y2 |
| 355-460 |
| ≥25 |
| 100-130 |
| ||||||||||||
| Y | R420/H125 | 410-540 | 420-500 | ≥13 | ≥6 | 120-160 | 125-155 | ||||||||||||
| T | R500/H155 | 520-620 | ≥500 | ≥4 |
| 150-190 | ≥155 | ||||||||||||
| TY | ≥570 |
| ≥180 |
| |||||||||||||||
| H65 | C2700 | C27000 | CUZn36 | M | O |
| R300/H055 | ≥290 | ≥275 |
| 300-370 | ≥40 | ≥40 |
| ≥38 | ≤90 |
|
| 55-95 |
| Y4 | 1/4H | H01 | R350/H095 | 325-410 | 325-410 | 340-405 | 350-440 | ≥35 | ≥35 |
| ≥19 | 85-115 | 75-125 | 43-57 | 95-125 | ||||
| Y2 | 1/2H | H02 | R410/H120 | 355-460 | 355-440 | 380-450 | 410-490 | ≥25 | ≥28 |
| ≥8 | 100-130 | 85-145 | 54-64 | 120-155 | ||||
| Y | H | H04 | R480/H150 | 410-540 | 410-540 | 470-540 | 480-560 | ≥13 |
|
| ≥3 | 120-160 | 105-175 | 68-72 | 150-180 | ||||
| T | EH | H06 | R550/H170 | 520-620 | 520-620 | 545-615 | ≥550 | ≥4 |
|
| 150-190 | 145-195 | 73-75 | ≥170 | |||||
| TY | SH | H08 | ≥585 | 570-670 | 595-655 |
|
|
| ≥180 | 165-215 | 75-77 | ||||||||
